Skip to main content
Premium Brands

Pylontech Force H3 & H3X.

Authorised Australian installer of Pylontech's Force H3 and all-in-one Force H3X — modular, high-voltage LFP storage from 10.24 to 35.84kWh. 8,000+ cycle rated with 10-year warranty.

SAA-Accredited InstallersSolar Accreditation Australia
10 Year WarrantyBacked by Mission Green
$0 Upfront Finance (subject to approval)Brighte, Plenti & 28Watts approved
7 States CoveredAustralia-wide service

Built to last.
Built to scale.

Pylontech's LFP batteries are rated above 8,000 cycles at 95% depth of discharge with a 15-plus year design life, run at around 95–97% round-trip efficiency, and carry a 10-year manufacturer warranty. Modules can be added over time rather than replaced.

Tier 1 Manufacturer

Pylontech is a globally trusted Tier 1 battery manufacturer with millions of units deployed worldwide. Proven reliability backed by years of real-world performance data.

8,000+ Cycles

Industry-leading cycle life rated above 8,000 cycles at 95% depth of discharge, with a 15+ year design life. Around 95–97% round-trip efficiency keeps more of your solar where it belongs — in your home.

Force H3 & H3X

Two ways to build the same LFP system. Force H3 stacks alongside a separate third-party hybrid inverter for maximum flexibility; Force H3X is the all-in-one with the hybrid inverter built in for the simplest install.

Modular & Stackable

Start with the capacity you need and add more modules over time. Pylontech's modular design means your system grows with your energy demands — no full replacement needed.

10-Year Warranty

Every Pylontech battery comes with a 10-year manufacturer warranty for peace of mind. Backed by one of the world's largest lithium battery producers.

Inverter Compatible

Compatible with most leading inverter brands including Goodwe, Sungrow, SolarEdge and Victron. Flexible integration for virtually any system configuration.

Pylontech
batteries.

Three lines, all built from 5.12kWh LFP modules: the Force H3, a high-voltage stackable tower that pairs with a separate third-party hybrid inverter; the Force H3X, the same stack with the hybrid inverter built in; and the legacy 48V US5000 rack series we still service.

Pylontech Force H3

High-voltage stackable LFP battery built from 5.12kWh FH10050 modules — 2 to 7 per tower for 10.24–35.84kWh nominal (~9.7–34kWh usable), up to 6 towers in parallel (≈210kWh). Pairs with a separate third-party hybrid inverter (Sungrow, Solis, GoodWe, Deye and others) — the flexible, inverter-agnostic option. 95% DoD, IP55, 10-year warranty.

Pylontech Force H3X

The all-in-one variant — the same 5.12kWh LFP modules but with a built-in hybrid inverter (e.g. 3.68/5kW single-phase) plus BMS and EMS, so no separate inverter is needed. Same 10.24–35.84kWh stacking and 6-tower scalability as the H3. The simplest install. 95% DoD, IP55, 10-year warranty.

Legacy: US5000 Rack Series

Pylontech's earlier low-voltage 48V rack-mounted line (≈4.8kWh modules) still backs many existing AC-coupled retrofits. We continue to support and service it, but new residential systems now lead with the high-voltage Force H3 and H3X.

Who should choose
Pylontech.

Pylontech is the smart choice for homeowners who want proven, modular battery storage without the premium price tag of Tesla or BYD. The Force H3 and H3X suit new builds and upgrades alike — pair the H3 with your preferred hybrid inverter, or keep it simple with the all-in-one H3X.

Inverter Choice, Your Way

Pick the Force H3 and pair it with a separate hybrid inverter from brands like Sungrow, Solis, GoodWe or Deye — or choose the all-in-one H3X with the inverter already built in. Flexible integration for virtually any setup.

Budget-Conscious Quality

Get Tier 1 battery technology at a competitive price point. Pylontech delivers the cycle life and warranty you need without the brand premium of bigger names.

Modular Expansion

Start small and scale over time. Add modules as your energy usage grows or your budget allows — Pylontech's stackable design makes future expansion simple and cost-effective.

Your concerns,
answered.

Pylontech is widely regarded as a solid, reliable battery choice for Australian homes. It is a Tier 1 battery manufacturer with over 800,000 units deployed globally, giving it a long real-world track record across many climates. Its batteries use LFP (lithium iron phosphate) chemistry, which is known for exceptional cycle life (8,000+ cycles) and strong thermal stability — two qualities that matter in Australian conditions, where summer heat and daily solar cycling put batteries under sustained load. LFP is also the chemistry most commonly chosen for home storage here because it runs cooler and degrades slowly. Whether Pylontech is the right battery for you depends on your energy use, your solar system and your inverter, so we assess each home individually rather than assuming one battery suits everyone. During your assessment we'll confirm whether a Pylontech system genuinely fits your needs and rebate eligibility.
Yes, Pylontech's Force H3 and H3X are designed to grow with your household, which suits Australian homes that add an EV, a pool or extra rooms over time. Both are built from 5.12kWh modules that stack together, so you can start with a 2-module tower (10.24kWh nominal) and add modules later without replacing what you already own. Each tower stacks up to 7 modules (35.84kWh), and you can run up to 6 towers in parallel as your needs grow, giving substantial headroom for larger homes or heavier usage. This modular approach means you don't have to buy your full capacity upfront — you can size the battery to today's bills and current rebate settings, then expand as your solar generation, electricity habits or budget change. During your assessment we'll help you choose a sensible starting size and a clear path to expand it.
Choosing between Pylontech's two Force models comes down to how you want your system built. The Force H3 is a high-voltage stackable battery that pairs with a separate third-party hybrid inverter (Sungrow, Solis, GoodWe, Deye and others), making it the flexible, inverter-agnostic option — a good fit if you already have a compatible inverter or want to mix and match brands. The Force H3X is the all-in-one variant with a built-in hybrid inverter, BMS and EMS, so no separate inverter is needed, which makes it the simplest install and often the tidier choice for a fresh setup. The right pick for an Australian home depends on your existing solar and inverter, your roof and switchboard, and how much you want to expand later. We'll recommend the best fit for your property and rebate eligibility during your assessment rather than pushing one model.

Read the
honest guides.

The comparisons and checks we'd run before recommending any battery — including when the honest answer is a different brand, or to wait.

We don’t only sell Pylontech. So this isn’t a sales pitch.

We install Pylontech alongside around 16 other solar and battery brands — so when we recommend it, it’s about your home and usage, not our stockroom.

~16 brands, no quota

We carry around 16 brands, not just Pylontech

Mission Green fits Pylontech alongside roughly 16 other solar and battery brands, so there’s no over-ordered stock to clear and no single-brand margin to chase. When we recommend Pylontech, it’s because it suits your home and usage. If a cheaper or better-suited brand is the honest answer for you, we’ll say so before you pay a deposit.

Compare us openly

Bring us your other quotes

Shortlisting Pylontech against other brands? Good — you should. Bring your other quotes and we’ll walk them line by line: what’s genuinely different, where a rival wins, and whether any premium is justified for your home. Sometimes the honest answer is a different brand — and we’ve written the guides that say so.

One accountable installer

One installer, whichever brand you pick

Mission Green designs, installs and commissions your system and coordinates the manufacturer warranty claim on your behalf, so you’re never bounced between the maker and a subcontractor. We’d stand behind any brand we carry just as fully — so choosing never means gambling on who turns up in year four.

MG coordinates the manufacturer warranty and handles claims on your behalf; it does not replace or extend it. Your Australian Consumer Law rights apply in addition.
Independence you can check

Accreditation, not just tone

Mission Green is a NETCC-approved and Solar Victoria authorised retailer working with SAA-accredited installers — the consumer-protection codes we’ve signed up to apply to your install whichever brand you land on.

Mission Green works with SAA-accredited installers. Brand names and logos are the property of their respective owners. Product availability and specifications may vary.

Get a Pylontech Quote.

SAA accredited installation · 10-year warranty · $0 upfront finance available

Book Free Assessment →